https://www.phoenixcontact.com/gb/products/2800107
Combination type 1/2 protective device - FLT 60-400 - 2800107
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Type 1 / Class I / B arrester (lightning current arrester) with arc chopping spark gap, 1-channel. Housing
width: 35 mm (2 div.)
Your advantages
High discharge capacity
1-channel
Key Commercial Data
Packing unit
1 pc
GTIN
GTIN
4046356479936
Weight per Piece (excluding packing)
254.700 g
Custom tariff number
85363010
Country of origin
Germany
Note
Made to Order (non-returnable)
Technical data
Dimensions
Height
90 mm
Width
35.5 mm
Depth
65.5 mm
Horizontal pitch
2 Div.
Ambient conditions
Degree of protection
IP20 (only when all terminal points are used)
Ambient temperature (operation)
-40 °C ... 85 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Altitude
≤ 2000 m (amsl (above mean sea level))
Permissible humidity (operation)
5 % ... 95 %
12/30/2019 Page 1 / 7
https://www.phoenixcontact.com/gb/products/2800107
Combination type 1/2 protective device - FLT 60-400 - 2800107
Technical data
General
IEC test classification
I
T1
EN type
T1
IEC power supply system
TN-S
TN-C
TT
Mode of protection
L-PEN
Mounting type
DIN rail: 35 mm
Color
jet black RAL 9005
Housing material
PA 6.6
Degree of pollution
2
Flammability rating according to UL 94
V-0
Type
DIN rail module, one-piece
Number of positions
1
Surge protection fault message
none
Protective circuit
Nominal voltage UN
230/400 V AC (TN)
230/400 V AC (TT)
Nominal frequency fN
50 Hz (60 Hz)
Maximum continuous voltage UC
400 V AC
Rated load current IL
80 A
Residual current IPE
< 0.1 mA
Standby power consumption PC
≤ 40 mVA
Nominal discharge current In (8/20) µs
60 kA
Impulse discharge current (10/350) µs, charge
30 As
Impulse discharge current (10/350) µs, specific energy
900 kJ/Ω
Impulse discharge current (10/350) µs, peak value limp
60 kA
Follow current interrupt rating Ifi
2.5 kA
Short-circuit current rating ISCCR
2.5 kA
Voltage protection level Up
≤ 5 kV
Front of wave sparkover voltage at 6 kV (1.2/50) µs
≤ 5 kV
TOV behavior at UT
440 V AC (5 s / withstand mode)
440 V AC (120 min / withstand mode)
Response time tA
≤ 100 ns
Max. backup fuse with V-type through wiring
80 A AC (gG)
Max. backup fuse with branch wiring
500 A AC (gG)
Connection data
Connection method
Screw connection
Screw thread
M6
12/30/2019 Page 2 / 7
https://www.phoenixcontact.com/gb/products/2800107
Combination type 1/2 protective device - FLT 60-400 - 2800107
Technical data
Connection data
Tightening torque
8 Nm
Stripping length
17 mm
Conductor cross section flexible
16 mm² ... 35 mm²
Conductor cross section solid
10 mm² ... 50 mm²
Conductor cross section AWG
6 ... 1
Standards and Regulations
Standards/regulations
IEC 61643-11 2011
EN 61643-11 2012
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
Dimensional drawing
12/30/2019 Page 3 / 7
https://www.phoenixcontact.com/gb/products/2800107
Combination type 1/2 protective device - FLT 60-400 - 2800107
Circuit diagram
Classifications
eCl@ss
eCl@ss 4.0
27130800
eCl@ss 4.1
27130800
eCl@ss 5.0
27130800
eCl@ss 5.1
27130800
eCl@ss 6.0
27130800
eCl@ss 7.0
27130802
eCl@ss 8.0
27130802
eCl@ss 9.0
27130802
ETIM
ETIM 2.0
EC000381
ETIM 3.0
EC000381
ETIM 4.0
EC000381
ETIM 5.0
EC000381
ETIM 6.0
EC000381
ETIM 7.0
EC000381
UNSPSC
UNSPSC 6.01
30212010
UNSPSC 7.0901
39121610
UNSPSC 11
39121610
UNSPSC 12.01
39121610
UNSPSC 13.2
39121620
UNSPSC 18.0
39121620
UNSPSC 19.0
39121620
UNSPSC 20.0
39121620
UNSPSC 21.0
39121620
Approvals
Approvals
Approvals
EAC
12/30/2019 Page 4 / 7
https://www.phoenixcontact.com/gb/products/2800107
Combination type 1/2 protective device - FLT 60-400 - 2800107
Approvals
Ex Approvals
Approval details
EAC
RU CDE.A*30.B01561
Accessories
Accessories
Bridge
Wiring bridge - MPB 18/1-57 - 2809238
Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 57-pos.
Wiring bridge - MPB 18/1-12 - 2748593
Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 12-pos.
Wiring bridge - MPB 18/1- 9 - 2748580
Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 9-pos.
Wiring bridge - MPB 18/1- 8 - 2748577
Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 8-pos.
12/30/2019 Page 5 / 7
https://www.phoenixcontact.com/gb/products/2800107
Combination type 1/2 protective device - FLT 60-400 - 2800107
Accessories
Wiring bridge - MPB 18/1- 6 - 2748564
Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 6-pos.
Wiring bridge - MPB 18/1- 4 - 2809225
Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 4-pos.
Wiring bridge - MPB 18/1- 3 - 2809212
Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 3-pos.
Wiring bridge - MPB 18/1- 2 - 2809209
Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 2-pos.
Device marking
Zack marker strip - ZBN 18:UNBEDRUCKT - 2809128
Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type:
snap into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual
labels: 5
End block
12/30/2019 Page 6 / 7
https://www.phoenixcontact.com/gb/products/2800107
Combination type 1/2 protective device - FLT 60-400 - 2800107
Accessories
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color:
gray
Labeled device marker
Marker for terminal blocks - ZBN 18,LGS:ERDE - 2749589
Marker for terminal blocks, Strip, white, labeled, Horizontal: Grounding symbol, mounting type: snap into tall marker
groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5
Marker for terminal blocks - ZBN 18,LGS:L1-N,ERDE - 2749576
Marker for terminal blocks, Strip, white, labeled, Horizontal: L1, L2, L3, N, GND, mounting type: snap into tall marker
groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5
Marker pen
Marker pen - B-STIFT - 1051993
Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
12/30/2019 Page 7 / 7
